- Household Appliance Test So...
- Power Supply Test Solution
- Motor Coil Test Solution
- Photovoltaic Component Test...
- Quality Inspection Institut...
- Military Power Supply and T...
- Aviation Power Supply and T...
- All Products
- - Electrical Safety Test Instru...
- - Power Supply Aumotic Test Sys...
- - Automatic Motor Test Instument
- - AC/DC Power Supply
- - AC/DC Electronic Load
- - AC/DC Power Analyzer
- - Special Device for Military /...

Product Model: AN510系列
Application: AC/DC Power Supply
Download:
- Introduction
- Technical Index
- More
Main Features:
★:High-power density, 3U standard chassis, high reaches 15kW power
★:Fast transient response function
★:High-accuracy, interior adopts 16 bits AD, low ripple wave
★:Flexible interface makes easy operation
★:Able to output in parallel mode, modular design, convenient for customers to dilatation
★:Flexible and super sequential test function.
★:Fix power output mode
★: Complete protection, safety performance assured
★:Analog control interface, able to control output independently through external analog interface of power supply
General Applications:
- Output mode: CV, CC
Programmable DC power supply output modes are CV and CC, up to value of output voltage, current and load resistance.
- Inlay short circuit, thermal protection:
inside is equipped with hardware and thermal protection, able to stop output in shortest time to protect DC test power.
- Power on selftest function
Each time when it starts and power on, the system will selftest, check part of the inner circuit. If it is abnormal, it can not enter normal standby interface
- 10 nonvolatile save and read back shortcut groups
To adapt for different kinds of test requirements, able to save 10 groups work mode and memorize 10 groups into nonvolatile storage stack, and convenient to invoke
- Sequential test
Sequential test function allows users to set a series of voltage current, power, and automatically output according to regulation set, satisfies user application requirement of automatic test and aging test. Able to memorize 50 sequences, each sequence contain 22 steps. Each step’s function can be set separately. And there are 13 kinds independent function including abundant control functions cycle control and slope model output, etc.
|
Mode No. |
AN51005-40(F) |
AN51010-40(F) |
AN51015-40(F) |
AN51005-600(F) |
AN51010-600(F) |
AN51015-600(F) |
|
|
Output Voltage |
0~40V |
0~40V |
0~40V |
0~600V |
0~600V |
0~600V |
|
|
Output current |
0~125A |
0~250A |
0~375A |
0~8A |
0~17A |
0~25A |
|
|
Output Power |
0~5KW |
0~10KW |
0~15KW |
0~5KW |
0~10KW |
0~15KW |
|
|
Input |
Phase |
three phase in three line +Pe |
|||||
|
Rated Voltage |
380 VAC±10% (342 - 418 VAC) |
||||||
|
Frequency |
47-63HZ |
||||||
|
Power Factor |
>0.78 |
||||||
|
Output |
Source Effect |
voltage: ±0.01% F.S current:±0.05% F.S (380VAC +/-10%input,load invariant) |
|||||
|
Load Effect |
Voltage: ± 0.02% F.S Current: ± 0.1% F.S (380VAC input voltage,from noload to full load) |
||||||
|
Load Transient Recover Time |
1ms (100% to 50% or 50% to 100%, voltage recover to the range of ±0.75% steady-state output) |
||||||
|
Efficiency |
0.87(standard AC output,full load) |
||||||
|
Stability |
±0.05% |
||||||
|
Output Voltage Compensation |
5% of output voltage(40-100V), 2% of output voltage(when it over 100V) |
||||||
|
Display |
Display Modes |
VFD, display in both English and Chinese |
|||||
|
Voltage Setting |
± 0.15% F.S (resolution)0.1V |
||||||
|
Voltage Display |
± 0.15% F.S (resolution)0.01V |
||||||
|
Current Setting |
± 0.4% F.S (resolution)0.1A |
||||||
|
Current Display |
± 0.4% F.S (resolution)0.01A |
||||||
|
Temperature Coefficient(Voltage) |
0.02% of max. output voltage/℃
|
||||||
|
Temperature Coefficient(Current) |
0.03% of max. output current/℃
|
||||||
|
Protection |
Input UV protect, lack phase protect, output OV protect, over heat protect, short circuit protect. |
||||||
|
Communication Interface |
RS-232 |
||||||
|
Remote Analog Control |
Accuracy |
Voltage:±0.25%F.S(0-5V),0.5% F.S(0-10V) Current:±0.8% F.S OVP:±1% F.S |
|||||
|
Environment |
Storage Temperature |
-25~65℃ |
|||||
|
Working Temperature |
0℃~50℃ |
||||||
|
Relative Humidity |
10~95%, No condensation |
||||||
|
Noise |
≤65dB |
||||||
|
Volume |
440mm×132mm×580mm(W×H×D)standard cabinet,3U in height |
||||||
|
Weight |
37kg |
||||||
Model:AN50 Series
Especially suitable for power supply frequency conversion air conditioner and DC motor. ★:With connection terminal of far feedback signal, able to automatically output voltage compensation under operation with large current; ★:Adopting high f...
Model:AN51 Series
AN51 Series DC Test Power Supply is a product series of DC Programmable Power Supply which is with exquisite appearance, small volume, excellent performance, powerful functions and simple operation. This series DC Power Supply is widely used in in...
Model:AN97 Series
Technical Parameters: ◆Use high frequency pulse width modulation and IGBT to achieve stable sine waveform voltage; ◆Adapt patent anti-shock technology, suitable for resistive, capacitive, inductive loads; ◆Automatic constant current technology...
Model:AN50/ AN51/AN61/AN97/AN98 Series
AC/DC Power Supply : 1. Programmable DC Power Supply--AN50 Series 2. DC Test Power Supply--AN51 Series 3. AC Test Power Supply--AN61 Series 4. Frequency Converter Power Supply--AN97 Series 5. Programmable high-power AC Power Supply--AN98 ...








