|
Model |
AN9632X |
|
AC Hipot Test |
|
Rated Output |
100VA (AC: 5kV/20mA) |
|
Output Voltage Set and Range |
0.2kV¡«5.00kV AC, 10V/step |
|
Output Voltage Adjustable Rate |
¡À(2.5% of setting+10V) |
|
Output Voltage Resolution/Accuracy |
10V, ¡À(2.5% of setting+10V) |
|
Output Frequency Range |
50Hz, 60Hz (Optional) |
|
Output Waveform |
Sine waveform, pure resistance, above 200V, distortion <5% |
|
Upper and Lower Limit Leakage Current Setting |
Upper: 0.10¡«20.00mA, Lower:0.10¡«20.00mA(0=disable), 0.01mA/step |
|
Leakage Current Measurement Range |
0.100¡«3.499mA/3.50¡«20.00mA |
|
Leakage Current Resolution |
0.001mA/0.01mA |
|
Leakage Current Accuracy |
¡À(2.5% of reading+5 counts) |
|
Ramp-up Time Setting Range/Resolution |
1.0¡«999.9s (0=disable) 0.1s/step |
|
Test Time Setting Range/Resolution |
1.0¡«999.9s (LLL=continues) 0.1s/step |
|
DUT Abnormal Processing |
Buzzer alarm, Light alarm |
|
Test Line Clear to Zero |
0¡«0.500mA, manual clear offset |
|
Insulation Resistance Test |
|
Output Voltage Setting and Measurement Range |
100V ¡«1000V DC 5V/step |
|
Output Voltage Resolution/Accuracy |
1V , ¡À(3% of setting+5V) |
|
DC Ripple Coefficient |
¡Ü5% (1kV DC, <1mA, resistance load) |
|
Output Voltage Adjustable Rate |
¡À(3% of setting+5V) |
|
Test Time Setting Range |
1.0¡«999.9s 0.1s/step (LLL= continues) |
|
Lower limit of Insulation Resistance |
1¡«2000M |
|
Upper limit of Insulation Resistance |
1¡«2000M (0=off) |
|
Insulation Resistance Range |
1¡«2000M, auto shift level |
|
Insulation Resistance Accuracy |
500¡«1000V: ¡À(3% of reading+8counts) 1¡«200M;
¡À(8% of reading+8counts) 200¡«2000M
Below 500V: ¡À(5% of reading+8counts) 1¡«200M;
¡À(10% of reading+8counts) 200¡«2000M |
|
General Parameter |
|
Interface Function |
RS232(RS485 optional), Remote control(PLC) |
|
Dimension W¡ÁH¡ÁD(mm) |
320¡Á110¡Á400 |
